EFC15 controller

EFC15

You can manually operate the electronic speed of an exodraft chimney fan with the EFC15 control.

You can turn the chimney fans off and on and adjust the chimney’s draft to the level of your choice.

The speed control is embedded into the on/off switch. When the fan is on, an LED light comes on.

  • Electronic speed regulation
  • Manual operation
DescriptionEFC15
Height (mm)79
Width (mm)52
Depth (mm)57
Max. load1,5 A
FuseT 1,6 AH
Voltage230 V AC, 50 Hz
Ambient temperature0 ºC – +40 ºC
Density classIP 30
MaterialABS
ColourWhite
  • Control EFC15
  • Description
  • Technical Specifications
  • Product Range
  • Documentation

EFC16

You can manually operate exodraft chimney fans using the EFC16 electronic speed control in the LK Fuga installation series. The chimney fan motor’s speed can be regulated regularly with the EFC16 control, allowing the chimney fan to be adjusted from 25 to 100%.

As such, you can personalize the chimney fan however you like, whether you are starting a fire, adding fuel to it, or simply want ongoing heat.

  • Electronic speed regulation
  • Manual operation
DescriptionEFC16
Height (mm)85
Width (mm)85
Depth (mm)52
Max. load1,5 A
FuseT 1,6 AH
Voltage230 V AC, 50 Hz
Ambient temperature0 ºC – +40 ºC
Density classIP 30
MaterialABS
ColourWhite
  • Control EFC16
  • Description
  • Technical Specifications
  • Product Range
  • Documentation
EFC18 controller

EFC18

You can manually control the EFC18 using 9 different speeds with built-in automatic stop/start for the exodraft chimney fan.

The boost function in it comes with allows simpler troubleshooting during ignition and the various settings simplify the lighting settings. It is also easy to refuel, and permits ongoing heating as well.

The EFC18 is equipped with a temperature sensor that can be installed below the chimney fan.

  • Nine unique settings
  • Automatic stop/start
  • Temperature sensor
DescriptionEFC18
Height (mm)85
Width (mm)85
Depth (mm)32,5
Max. load1,2 A
FuseT 1,25 AH
Voltage230 V AC, 50 Hz
Workspace for sensor-50 ºC – +400 ºC
Ambient temperature0 ºC – +40 ºC
Density classIP 30
MaterialABS
ColourWhite
  • Control EFC18
  • Description
  • Technical Specifications
  • Product Range
  • Documentation
EFC21 controller

EFC21

The control EFC21 was developed for gas fireplaces that are connected to an exodraft chimney fan.

The control monitors the failsafe function and if there is not sufficient chimney draft, the EFC21 stops the gas supply to the fireplace. This is to ensure that no gas enters the room.

When the EFC21 is activated, the chimney fan runs at full speed. If the flowmeter confirms that the chimney draft is sufficient, then the fireplace can be lit and the speed of the chimney fan can be regulated to a pre-set value.

  • Developed for gas fire places
  • Monitors the failsafe function
  • Ensures that no gas enters the room
DescriptionEFC21
Height (mm)85
Width (mm)126
Depth (mm)32
Failsafe pressure control (PDS)24 V DC (supply for closed circuit)
Fuse3,15 A T
Voltage230 V AC, 50 Hz
Chimney fan outlet1,8 A/230 V (AC 3)
Output, gas solenoid valve (SMG)230 V AC, max. 100 VA
DIP-switch settingsManuel setting with 3-minute caster
Input, remote on / off button24 V DC (supply for closed circuit)
Settings for the chimney fan speedPotentiometer on the circuit board
Relay outputMax. 3,15 A 250 V AC/3,15 A 30 VDC (Load: 3,15 AT)
Ambient temperature0 ºC – +40 ºCt
Density classIP 30
MaterialABS
ColourWhite
GASTEC-approvalCertifikat-nr.: PIN:0063BT1395
  • Control EFC21
  • Description
  • Video
  • Technical Specifications
  • Product Range
  • Documentation

EBC10

The EBC10 is an automatic control with a pressure transducer (XTP) for one boiler or other installations with one heat source.

With the help of the XTP sensors, which are installed in the chimney, the low pressure is monitored and maintained by regulating the speed of the chimney fan.

The control has inputs and outputs for one boiler.

  • Pressure transducer
  • XTP sensor
  • For one heat source
DescriptionEBC10
Dimension (H x W x D)175 x 175 x 100 mm
Weight1.5 kg
Density classIP 54
Control range0 Pa – 150 Pa
Fuse4.0T
Voltage230 V AC, 50 Hz
Power consumption475 W
Settings for the chimney fan speedPotentiometer on the circuit board
Relay outputMax. 3.15 A 250 V AC/3.15 A 30 VDC (Load: 3.15 AT)
Ambient temperature-20 ºC – +50 ºC
MaterialABS
  • Control EBC10
  • Description
  • Technical Specifications
  • Product Range
  • Documentation

EBC22

The EBC22 is an automatic control that comes with a pressure transducer (XTP) for multiple boilers or other installations where numerous heat sources are associated with the same chimney.

With the assistance of the chimney-installed XTP sensor, the low pressure is maintained and monitored by regulating the chimney fan’s speed. There are outputs and inputs on the control for up to two boilers.

You can regulate up to four boilers with the addition of the exodraft ES12 relay box.

  • Pressure transducer
  • XTP sensor
  • For one or more heat sources
DescriptionEBC22
Dimension (H x W x D)t204 x 240 x 77 mm
Weight1,62 kg
Density classIP 54
Control range0 Pa – 150 Pa
FuseT 4 A
Voltage230 V AC, 50 Hz
Power consumption475 W
Settings for the chimney fan speedPotentiometer on the circuit board
Relay outputMax. 3,15 A 250 V AC/3,15 A 30 VDC (Load: 3,15 AT)
Ambient temperature-20 ºC – +60 ºC
MaterialABS
ColourWhite
GASTEC-approvalCertifikat-nr.: PIN:0063BT1395
  • Control EBC22
  • Description
  • Technical Specifications
  • Product Range
  • Documentation

EHC20

The EHC20 is a SMART heat recovery device for your exodraft. If the temperature surpasses the intended water side level, the EHC20’s heat recovery unit opens the secondary flow valve and directs the flue vapor/gas toward the chimney.

As such, overheating is ceased, thereby ensuring safe operation.

The EHC20 also regulates a 3-way mixing valve in order to maintain circulation toward the collection tank, which happens when the water has achieved the intended temperature.

If the water hasn’t reached the intended temperature, the heat exchanger recirculates until the intended temperature is achieved.

  • Intelligent control
  • Overview of your energy savings
  • Quick set-up with the Startup Wizard
DescriptionEHC20
Height (mm)228
Width (mm)180
Depth (mm)53
DisplayGraphic LCD display, 128 x 128 points
Power consumption0,5-3 W
Voltage100-240 V AC, 50-60 Hz
Internal fuse2 A
Sensor inputs8 x PT10002 x Grundfos direct sensors 1 x RC21
Workspace, sensorsPT1000 -40 – 300 °C Grundfos direct 0 – 100 °C
Network connectionsEthernet (optional) CAN bus
Media for reading and writingMicroSD reader
Relay outputMax. 3,15 A 250 V AC/3,15 A 30 VDC (Load: 3,15 AT)
Operating temperature0-40 °C
Storage temperature0-60 °C
Max. humidityMax. 85% humidity, no condensation
  • Control EFC15
  • Description
  • Technical Specifications
  • Product Range
  • Documentation
EFC35 controller

EFC35

The EFC35 is an electronic speed control for exodraft chimney fans that is manually operated.

The chimney fan’s motor speed can be continuously regulated with the EFC35 and its efficiency can be adjusted from 25 – 100%. As such, you can modify your chimney fan to your existing needs, whether you would like to start a fire, add fuel to it, or keep the room heated.

  • On/off switch with LED indicator
  • Manual operation
DescriptionEFC35
Height (mm)102
Width (mm)74
Depth (mm)67
Max. load3,5 A
FuseT 4 AH
Voltage230 V AC, 50 Hz
Ambient temperature0 ºC – +35 ºC
Density classIP 30
MaterialABS
ColourWhite
  • Control EFC35
  • Description
  • Technical Specifications
  • Product Range
  • Documentation

EW41 *

The exodraft EW41 remote control regulates chimney fans with fireplaces that are operated with solid fuels (for instance, stoves or fireplaces). The chimney fan can be switched on or off, and the speed can be adjusted on the EW41 control panel. It remembers the most recent settings and displays consumption data as well.

The temperature sensor monitors the system’s operation automatically and stops it from overloading. The system will start on its own if the fireplace is lit without first being turned on.

  • Hassle-free lighting via to the Auto Boost option
  • Assistance during refueling
DescriptionEW41
Frequency868,42 MHz
ProtocolZ-wave
RangeUp to 12 meters in building
Control boxEW41
Dimension (W x H x D)122 x 120 x 55 mm
Density classIP 64
Voltage230 V AC, 50 Hz
Temperature sensor-50 ºC – +450 ºC
Operating temperature-30 ºC – +60 ºC
Power output2 A
FuseT 2.0 A
MaterialABS
Standby power1 W
Control panel:EW41
Dimension (W x H x D)130 x 100 x 44 mm
MaterialABS
Operating temperature0 ºC – +40 ºC
Density classIP 20
Battery 4 AA batteries (LR6)
Battery life(estimated)1 year
  • EW41 signal amplifier
  • Assembly set for EW41
  • Power cord for the EW41 control panel
  • Control EW41
  • Description
  • Technical Specifications
  • Product Range
  • Documentation

EBC24

The EBC24 is an automatic control that comes with a pressure transducer (XTP) for multiple boilers or other installations where numerous heat sources are associated with the same chimney.

With the assistance of the chimney-installed XTP sensor, the low pressure is maintained and monitored by regulating the chimney fan’s speed. There are outputs and inputs on the control for up to two boilers.

You can regulate up to four boilers with the addition of the exodraft ES12 relay box.

  • Pressure transducer
  • XTP sensor
  • For one or more heat sources
DescriptionEBC24
Dimension (H x W x D)175 x 175 x 100 mm
Weight1.5 kg
Density classIP 54
Control range0 Pa – 150 Pa
Fuse4.0T
Voltage230 V AC, 50 Hz
Power consumption475 W
Settings for the chimney fan speedPotentiometer on the circuit board
Relay outputMax. 3.15 A 250 V AC/3.15 A 30 VDC (Load: 3.15 AT)
Ambient temperature-20 ºC – +50 ºC
MaterialABS
ColourTransparent cover (indoor) or grey cover (outdoor)
  • Control EBC24EU01 (indoor)
  • Control EBC24EU02 (outdoor)
  • Description
  • Technical Specifications
  • Product Range
  • Documentation