exodraft chimney fan increases comfort:
Easy to light fire. Easy to control heat. No blackening of stove glass.
exodraft chimney fan increases efficiency:
15% less wood is needed.
exodraft chimney fan reduces particles by:
80% indoor. 20% outdoor.
exodraft chimney fan is CO2 friendly:
Wood/biomass is considered CO2-neutral if trees are replanted.
exodraft chimney fan is easy to use:
Wireless versions. Auto turn off/on.
exodraft chimney fan is easy to install:
Optimal draught regardless of weather conditions.
An exodraft chimney fan system consists of a chimney fan combined with a control to regulate the speed, which puts you in control of the chimney draught.
The chimney fan is easy to mount on top of the chimney and can be opened for cleaning and maintenance.
An exodraft fan is reliable, quiet in operation and built to last for a long time. Our fans tolerate constant temperatures up to 250 ℃.
With an exodraft chimney fan system, you always have control of the chimney draught regardless of the weather conditions or other influencing external factors.
Since the fire takes hold much quicker, fewer particles escape into the atmosphere, which is for the benefit of both the environment and you.
You may not have had any problems previously with your fireplace or woodburning stove, but something may have changed:
A chimney fan is an electric fan for high temperatures.
It is fitted onto the chimney and ensures that your fireplace, fire or woodburning stove receives enough air to burn all day cleanly and without any problems.
The chimney fan creates a negative pressure in the chimney, eliminating the problems experienced when lighting solid fuel fires.
A chimney fan is positioned on the top of the chimney and ensures the right draught for the fire or woodburning stove. If you have a brick chimney, you can conceal the chimney fan.
The chimney fan is electric and is controlled from inside the house.
The control unit is installed in the most practical location for you.
A chimney fan creates a negative pressure in the chimney.
When the chimney fan is switched on, a draught is created in the chimney and the fire burns cleanly and without smoking.
Watch this film from our laboratory, in which the chimney fan is switched on after 35 seconds.
The laboratory test is performed with an RSV009 chimney fan and EW41 control unit.
Shortness of breath
Natural chimney draught is a thing of the past and has been since we began to draughtproof our homes, build low-energy houses and use fume hoods.
It’s a battle for air in the draughtproof house, and the woodburning stove or fireplace is often short of breath.
Catch your breath again
At exodraft we want to help your fireplace to breathe so that it is easy to light and you avoid sooty odours and smoke in the room.
In return, you get to decide when draught is needed in your chimney and how much.
Put the remote control for your chimney fan next to the remote control for your TV and enjoy letting your fire take care of itself again.
The chimney fan must be cleaned
The law states that you must have your chimney cleaned by a chimney sweep, but the chimney sweep is not required by law to clean the chimney fan. It is up to you, therefore, to ensure that the chimney fan is cleaned at least once a year so as to keep the flue clear on your chimney.
Reduced risk: No birds in the chimney
An exodraft chimney fan prevents birds or dirt from getting into the chimney and blocking it, causing smoke to escape into the home.
You might say “I’ve never seen one” when you hear about the exodraft chimney fan. That doesn’t matter to us. We manufacture chimney fans not for them to be seen, but for them to work.
Look up next time you’re out for a stroll and you’re sure to see a number of exodraft chimney fans on chimneys on your way.
Often, you can replace a long chimney with a chimney fan.
The fan sends smoke into the air and keeps the exhaust gases and particles away from the roof and your neighbor.
The exodraft fan solution is much easier.
The exodraft chimney fan system maintains a constant draught in the flue.
The control unit and chimney fan coordinate the draught to the boiler and ensure that individual boiler efficiency is always in balance with that of the environment.
Best possible draught = complete consumption of the fuel. This gives big economic advantages.
Placement of the chimney fan
A correctly installed chimney fan cannot fall down. The weight of the chimney fan itself, a steel wire and the angle brackets or flange hold the chimney fan in position on the top of the chimney, even in very stormy weather. A steel wire also ensures that the chimney fan cannot fall when it is opened for cleaning and maintenance.
Effect on the draught
The effect that the wind can have on the draught in the flue is offset by adjustment of the chimney fan.
The high construction quality of the fan and the uniquely balanced, high quality ball bearings ensures an extremely quiet solution.
You might still hear a slight hiss due to the very air that moves in the flue pipe.
Is the sound in any way bothersome, contact exodraft.
With an exodraft chimney fan system, you are able to regulate the chimney draught according to your needs, providing you with the optimal chimney draught even before you light the fire.
This gives you more time to enjoy the full comfort of a warm fireplace or wood burning stove.
The chimney fans are intended for open and closed fireplaces and fit both brick stack and twin wall steel chimneys.
Installing a chimney fan is a simple procedure offered by your nearest fireplace/stove showrooms or HETAS registered installer.
A 2014 study by a well known danish technological institute shows that a chimney fan removes 80% of the smoke particles that would otherwise end up in your home.
The result is a cleaner and healthier indoor environment.
exodraft is a Danish owned company that has for over 60 years developed, manufactured and sold chimney fans to control chimney draught.
With sales in more than 40 countries and the best product range on the market, exodraft is the world leader in solutions for mechanical chimney draught and heat recovery from flue gas/process heat.Read more